{"title":"Cybersecurity Tools","description":"\u003cp\u003eDesignated tools for penetration testing, monitoring, logs, deauth, etc.\u003c\/p\u003e","products":[{"product_id":"sensecap-solar-node-p1-pro","title":"SenseCAP Solar Node P1-Pro","description":"\u003cp\u003eThe SenseCAP Solar Node P1-Pro is a solar-powered Meshtastic\/MeshCore node designed for long-term outdoor deployment. It comes with everything you need to get set up right out of the box, including four 18650 batteries, a GPS module, and pre-flashed and configured with your firmware of choice.\u003c\/p\u003e\n\u003cp\u003eMount it on a pole or wall to extend your mesh network's range and reliability. The integrated 5W solar panel keeps the batteries topped off, and the nRF52840-based radio draws minimal power, so this node can run indefinitely in most environments with as little as an hour of sunlight per day.\u003c\/p\u003e\n\u003cp\u003eThe P1-Pro supports communication ranges up to 9km in open areas and can function as either a standalone node or a repeater to relay messages across your mesh. Built-in GPS provides real-time positioning, making it a solid option for remote area tracking and outdoor operations.\u003c\/p\u003e\n\u003cp\u003eA Grove expansion port lets you connect environmental sensors (temperature, humidity, air quality) for remote monitoring applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAtlavox ships your solar node pre-flashed with the latest firmware — no assembly, flashing, or configuring required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✅ \u003cstrong\u003eSolar Powered\u003c\/strong\u003e — 5W integrated solar panel with \u003cstrong\u003efour 3,350mAh\u003c\/strong\u003e 18650 batteries for 24\/7 operation\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eBuilt-in GPS\u003c\/strong\u003e — XIAO L76K module with GPS, GLONASS, and Galileo support for real-time positioning and time-keeping\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eLong Range\u003c\/strong\u003e — Up to 9km in open areas\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eMeshtastic\/MeshCore Ready\u003c\/strong\u003e — Pre-flashed with either Meshtastic or MeshCore firmware, no setup required\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eBluetooth 5.0\u003c\/strong\u003e — Connect to the free Meshtastic or MeshCore app on your phone for configuration and messaging, or deploy it as a standalone repeater without needing to connect to your phone\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eLow Power\u003c\/strong\u003e — nRF52840 processor optimized for energy efficiency\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eExpandable\u003c\/strong\u003e — Grove port (I2C\/GPIO) for plug-and-play sensor modules\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eOutdoor Rated\u003c\/strong\u003e — includes pole and wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eUSB-C Charging\u003c\/strong\u003e — Charge via solar or USB-C when not deployed\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eFCC \u0026amp; CE Certified\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain Controller\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXIAO nRF52840 Plus (ARM Cortex-M4, 64MHz, 256KB RAM, 1MB Flash, 2MB onboard Flash)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoRa Module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWio-SX1262 (Semtech SX1262)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTX Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to +22 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e862–930 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGPS Module\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXIAO L76K (GPS \/ GLONASS \/ Galileo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBluetooth 5.0, USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolar Panel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5W integrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4× 18650 lithium-ion (3,350mAh each, button-top)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCharging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSolar + USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temp (discharge)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°C to 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCharging Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0°C to 50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2dBi rubber rod (868–915MHz), RP-SMA connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExpansion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGrove port (I2C \/ GPIO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePole mount (70–100mm diameter) and wall mount brackets included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFCC, CE, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSeeed Studio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSenseCAP Solar Node P1-Pro\u003c\/li\u003e\n\u003cli\u003e4× 18650 batteries (pre-installed)\u003c\/li\u003e\n\u003cli\u003eRP-SMA antenna of your choice\u003c\/li\u003e\n\u003cli\u003eAntenna cable (RP-SMA Male to RF-SMA Female)\u003c\/li\u003e\n\u003cli\u003eMounting brackets and hardware (pole + wall mount)\u003c\/li\u003e\n\u003cli\u003eUSB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse Cases\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Network Expansion\u003c\/strong\u003e — Deploy as a solar repeater to fill coverage gaps and relay messages between nodes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-Grid Communication\u003c\/strong\u003e — Text and GPS in areas with no cell service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor Tracking\u003c\/strong\u003e — Real-time GPS positioning for remote operations, farms, parks, trails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Monitoring\u003c\/strong\u003e — Connect Grove sensors for temperature, humidity, and air quality data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency Preparedness\u003c\/strong\u003e — Set-and-forget solar node for resilient off-grid comms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBatteries are button-top 18650 (3.6V). If replacing, use button-top only.\u003c\/li\u003e\n\u003cli\u003eFor best GPS performance, mount with a clear view of the sky.\u003c\/li\u003e\n\u003cli\u003eClean the solar panel periodically for maximum charging efficiency.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/wiki.seeedstudio.com\/meshtastic_solar_node\/\"\u003eSenseCAP Solar Node P1-Pro Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Atlavox.com","offers":[{"title":"915MHz","offer_id":67687622541494,"sku":"SED-RA-P1P9","price":119.0,"currency_code":"USD","in_stock":false},{"title":"868MHz","offer_id":67687622574262,"sku":"SED-RA-P1P8","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/Hero_c286e0e2-20ab-4927-a336-2439939f8863.png?v=1792439995"},{"product_id":"atlavox-beacon-solar-meshcore-node-preconfigured","title":"Atlavox Beacon Solar MeshCore Node – Preconfigured","description":"\u003cp\u003eThe Atlavox Beacon is a solar-powered mesh radio node that can increase the coverage and reliability of your MeshCore™ network. This all-in-one unit combines the solar panel, enclosure, and antenna mounting rail into an integrated frame system that offers multiple mounting options. This \u003cstrong\u003ePreconfigured \u003c\/strong\u003eversion is our most popular configuration and includes the ALFA 7\" 5dBi antenna, ready to deploy out of the box. It will be flashed with the latest MeshCore firmware immediately prior to shipping. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to change settings on your Beacon MeshCore Repeater:\u003c\/strong\u003e Go to https:\/\/config.meshcore.dev\/, connect the Beacon to your computer with USB cable. Or, administer your repeater remotely over the mesh from a companion node.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✅ Atlavox Beacon: \u003c\/strong\u003eFlashed with latest MeshCore Repeater firmware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✅ ALFA 5Dbi Antenna: \u003c\/strong\u003eA compact, mid-gain antenna, with great performance, ideal for most terrain. Available in 915MHz and 868MHz, depending on the variant you pick. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✅ Internal Bluetooth Antenna: \u003c\/strong\u003eMeshCore repeater firmware does not utilize the Bluetooth radio. But if you ever wanted to reflash the Beacon as a Companion BLE device or flash Meshtastic firmware, you'd already have a Bluetooth antenna installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✅ N-Type Pigtail Cable: \u003c\/strong\u003eFor connecting your LoRa antenna from the antenna rail to the enclosure.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Atlavox.com","offers":[{"title":"915MHz","offer_id":67687629881526,"sku":"AVX-RA-BCMC9","price":259.77,"currency_code":"USD","in_stock":false},{"title":"868MHz","offer_id":67687629914294,"sku":"AVX-RA-BCMC8","price":259.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/MeshCorePrecon.png?v=1792440009"},{"product_id":"wisblock-meshtastic-starter-kit","title":"WisBlock Meshtastic Starter Kit","description":"\u003cp\u003eThe WisBlock Meshtastic Starter Kit from RAK enables you to build your own Meshtastic radio. It's the same RAK19007 Baseboard used in the Atlavox M1 and Atlavox Beacon. \u003c\/p\u003e\n\u003cp\u003eIncluded in each kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRAK19007 BaseBoard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRAK4631 Core (preinstalled)\u003c\/li\u003e\n\u003cli\u003eUSB-A to USB-C cable\u003c\/li\u003e\n\u003cli\u003eBluetooth PCB antenna with iPEX connector\u003c\/li\u003e\n\u003cli\u003eLoRa antenna, PCB with iPEX connector\u003c\/li\u003e\n\u003cli\u003eiPEX to SMA cable with bulkhead connector.\u003c\/li\u003e\n\u003cli\u003eSMA antenna\u003c\/li\u003e\n\u003cli\u003eScrews for mounting WisBlock and attaching optional modules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlavox.com","offers":[{"title":"Default Title","offer_id":67687665991862,"sku":"RAK-116016","price":36.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/WisBlockKitContents.png?v=1792440076"},{"product_id":"atlavox-m1-meshtastic™-radio-w-gizont-antenna","title":"Atlavox M1 Meshtastic™ Radio w\/Gizont Antenna","description":"\u003cp\u003eSend off-grid text messages and location data to your friends and family without internet or cell coverage using this \u003ca rel=\"noopener noreferrer\" title=\"Meshtastic\" href=\"https:\/\/meshtastic.org\/\" target=\"_blank\"\u003eMeshtastic™\u003c\/a\u003e radio. Pairs to your phone or computer via bluetooth\/USB. Download the free, open-source Meshtastic app and communicate using this decentralized, off-grid radio.\u003c\/p\u003e\n\u003cp\u003eNo subscription, registration, fees, or license required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAK WisBlock \u003c\/strong\u003eIncluded and preinstalled 915MHz (United States \u0026amp; Canada) or 868MHz (for EU) \u003ca rel=\"noopener noreferrer\" title=\"Meshtastic Starter Kit\" href=\"https:\/\/atlavox.com\/products\/wisblock-meshtastic-starter-kit\" target=\"_blank\"\u003eRAK19007 WisBlock Meshtastic™ Radio\u003c\/a\u003e. Preinstalled in the full radio, or just buy the case and install your own. \u003ca href=\"https:\/\/atlavox.com\/products\/atlavox-m1-meshtastic%E2%84%A2-radio-diy-case\"\u003e Click here to buy just the case.\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Disassembly \u003c\/strong\u003eof thermal-set threaded inserts means no fumbling with tiny washers and nuts. Simply unscrew the four bolts to open the radio to upgrade or add sensors, GPS, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsolidated\u003c\/strong\u003e  A key design objective was to have all equipment secured to the bottom half of the case, so when you unscrew the top, you can remove it without worrying about pulling any wires or components. The top of the case does not have anything mounted to it, so you can safely set it aside when you open the radio. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Battery Switch\u003c\/strong\u003e No soldering required. The battery plugs into the preinstalled, custom-switch PCB header and uses an auxiliary cable to power the WisBlock. The battery switch, conveniently located at the top of the radio, is accessible one-handed by the thumb holding the radio. The switch is protected by top rails to prevent accidental interaction, and the strap and cordage slots bypass the switch. The switch needs to be on in order to charge the battery, but you can power down the radio module in the Meshtastic app while charging if you'd like to. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgradeable\u003c\/strong\u003e Integrated GPS antenna slot allows you to add a \u003ca title=\"RAK12500 GPS\" rel=\"noopener noreferrer\" href=\"https:\/\/atlavox.com\/products\/rak-gnss-gps-wisblock-module-rak12500\" target=\"_blank\"\u003eRAK12500 GPS\u003c\/a\u003e or a \u003ca href=\"https:\/\/atlavox.com\/products\/rak-gps-wisblock-module-rak12501\" title=\"RAK12501 GPS\"\u003eRAK 12501 GPS\u003c\/a\u003e in the future. \u003cem\u003e(If paired to your phone, a GPS sensor isn't required because you can share your phone's GPS data with the M1.)\u003c\/em\u003e The RAK19007 has 3 sensor slots for additional accessories, like the\u003ca href=\"https:\/\/atlavox.com\/products\/rak1901-temperature-and-humidity-sensor\" title=\"Temp Sensor\"\u003e RAK1901 Temp \u0026amp; Humidity sensor\u003c\/a\u003e. Both the GPS and Temp sensor can be installed and configured on the radio at the same time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical ID\u003c\/strong\u003e Deploying radios to a team? Keep track of who's who using the 2-digit, 6-position alpha-numeric dice identifiers to immediately sort out which radio is which. This enables you to distinguish up to 72 different radios. By default, I will start your radios at A1, and go up from there. If you have a preference, leave a note at checkout and I'll see what I can do.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA Antenna \u003c\/strong\u003eA 915MHz or 868MHz Gizont whip antenna is included with the radio, depending on the variation you purchase.  \u003cem\u003e(*Shop.app exclusive. Buy on Atlavox.com to choose your antenna and further customize your radio.) \u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecuring\u003c\/strong\u003e Multiple holes and slots available for securing your radio to your backpack, lanyard, Molle equipment, or wherever you want to put it. \u003cstrong\u003eAll fully assembled radios and cases\u003c\/strong\u003e include a custom Atlavox hook \u0026amp; loop strap to secure the radio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG\/HT-PLA\u003c\/strong\u003e 3D printed, two-part case. We are transitioning the black base to a  beautiful matte, high-temp PLA, rated for 150°C, printed with 4 walls and 1.6 layer height, resulting in a durable, heat-resistant, rugged finish. Textured front and back, with grooves recessed around the body, further enhances grip. The top cover is PETG \"Forest Green\". (More top colors coming soon.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSturdy \u003c\/strong\u003eStands tall in the upright position on a flat surface or laid down flat on its back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e The case can accommodate up to a 56mm x 34.5mm x 10.3mm size battery. EEMB 3.7V Lithium Polymer Battery 2000mAh 103454 is included when you purchase a fully assembled radio. Or power it via USB-C without a battery. (Need to buy a battery for your case? \u003ca href=\"https:\/\/amzn.to\/3Al9Nvl\" title=\"EEMB Battery\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGet the EEMB 103454 with reverse polarity\u003c\/a\u003e. AFFILIATE LINK)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected \u003c\/strong\u003eBattery has built-in protection:\n\u003cul\u003e\n\u003cli\u003eOvercharge voltage: 4.28V\u003c\/li\u003e\n\u003cli\u003eOverdischarge voltage: 3.0V\u003c\/li\u003e\n\u003cli\u003eOvercurrent: 2000mA\u003c\/li\u003e\n\u003cli\u003eShort Circuit protection\u003c\/li\u003e\n\u003cli\u003eOver temperature protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e Power or charge your radio with USB-C, flash firmware, and a serial connection to your computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth\u003c\/strong\u003e An internal bluetooth antenna is included and installed with the full radio. The case includes a slot for installing the RAK Bluetooth PCB antenna in the Meshtastic Starter Kit. Bluetooth enables you to connect to your cell phone wirelessly and use the Meshtastic app. The default Bluetooth code is \u003cstrong\u003e123456\u003c\/strong\u003e, but you can change it in the configuration. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTwo versions\u003c\/h2\u003e\n\u003cp\u003eBuy a fully assembled radio configured for North America or EU, or if you already have a RAK Meshtastic Starter Kit, you can buy just the case and assemble your radio yourself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull M1 Radio Includes\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully assembled M1 Radio\n\u003cul\u003e\n\u003cli\u003eRAK19007 WisBlock w\/RAK4630 for 915MHz or 868MHz Frequencies.\u003c\/li\u003e\n\u003cli\u003eMeshtastic preinstalled (Latest stable version, flashed immediately before shipping)\u003c\/li\u003e\n\u003cli\u003eBluetooth Antenna\u003c\/li\u003e\n\u003cli\u003eiPEX to SMA cable\u003c\/li\u003e\n\u003cli\u003eEEMB 3.7V 2000mAh Li-ion Polymer Battery \u003ca rel=\"noopener noreferrer\" title=\"EEMB Battery\" href=\"https:\/\/amzn.to\/3Al9Nvl\" target=\"_blank\"\u003eLP103454RP-PCM-LD (AFFILIATE LINK)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAtlavox Power Switch (No Soldering Required)\u003c\/li\u003e\n\u003cli\u003e(1) Alpha cube [A,B,C,D,E,F]\u003c\/li\u003e\n\u003cli\u003e(1) Numba cube [1,2,3,4,5,6]\u003c\/li\u003e\n\u003cli\u003eBlack Bottom Case w\/thermal set threaded inserts\u003c\/li\u003e\n\u003cli\u003eForest Green Top Case\u003c\/li\u003e\n\u003cli\u003e(4) M3x10 Bolts (For securing case)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) 2.5mm Allen Wrench per order (For removing the top of case)\u003c\/li\u003e\n\u003cli\u003eAtlavox Hook \u0026amp; Loop Strap\u003c\/li\u003e\n\u003cli\u003eLoRa antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCase-only Includes\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Bottom Case w\/thermal set threaded inserts\u003c\/li\u003e\n\u003cli\u003eForest Green Top Case\u003c\/li\u003e\n\u003cli\u003e(1) Alpha cube [A,B,C,D,E,F]\u003c\/li\u003e\n\u003cli\u003e(1) Numba cube [1,2,3,4,5,6]\u003c\/li\u003e\n\u003cli\u003e(4) M3x10 Bolts (For securing case)\u003c\/li\u003e\n\u003cli\u003eAtlavox Hook \u0026amp; Loop Strap\u003c\/li\u003e\n\u003cli\u003e(1) 2.5mm Allen key per order\u003c\/li\u003e\n\u003cli\u003eiPEX to SMA cable\u003c\/li\u003e\n\u003cli\u003eCustom no-solder battery switch w\/cable\u003c\/li\u003e\n\u003cli\u003e(2) Foam Adhesive strips for battery cushioning\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCase-only requires a \u003ca title=\"WisBlock Starter Kit\" href=\"https:\/\/atlavox.com\/products\/wisblock-meshtastic-starter-kit\"\u003eRAK19007 WisBlock Meshtastic Starter Kit\u003c\/a\u003e, and an EEMB 3.7V 2000mAh Li-ion Polymer Battery \u003ca rel=\"noopener noreferrer\" title=\"EEMB Battery\" href=\"https:\/\/amzn.to\/3Al9Nvl\" target=\"_blank\"\u003eLP103454RP-PCM-LD (AFFILIATE LINK)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"background-color: #ffff00;\"\u003e\u003ca style=\"background-color: #ffff00;\" href=\"https:\/\/atlavox.com\/pages\/atlavox-m1-assembly\" title=\"Atlavox M1 Assembly Instructions\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003eATLAVOX M1 RADIO ASSEMBLY INSTRUCTIONS\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCase Dimensions\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3 5\/8\" (92mm) High\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 5\/16\" (58mm) Wide\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 3\/16\" (29mm) Thick\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis case does not accommodate an OLED screen and does not have a user button. All customization and interaction with the radio is done wirelessly through Bluetooth using the free Meshtastic app or USB and a PC. Meshtastic is open source, free, and does not require internet, cell service, or any subscription service to operate. \u003c\/p\u003e","brand":"Atlavox.com","offers":[{"title":"915MHz","offer_id":67687691616438,"sku":"AVX-RA-M1F9G","price":89.96,"currency_code":"USD","in_stock":false},{"title":"868MHz","offer_id":67687691649206,"sku":"AVX-RA-M1F8G","price":89.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/M1Gizont.png?v=1792440122"},{"product_id":"preloaded-pwnagotchi-sd-card","title":"Preloaded Pwnagotchi SD Card","description":"\u003ch3\u003e\u003cstrong\u003eNote: This is for the high-speed SD card, preloaded with the pwnagotchi and waveshare drivers! \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eCompatibility: Raspberry Pi Zero WH v2 with WaveShare v3\/v4 screen only.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eHave your own kit and need a preloaded SD card?  Well, we have an awesome deal for you! Each preloaded SD card features a high-speed 16GB, preconfigured for the latest Waveshare v3 and v4 drivers, ready to plug and play. Each shipment includes;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA preconfigured phreakbotique SD card\u003c\/li\u003e\n\u003cli\u003eDC207 Stickers\u003c\/li\u003e\n\u003cli\u003eMad respect from Maine's hackers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDC207 assembles these to help support its mission and activities of working on unique technology projects, feeding hackers at our meetups, and fostering and building a fantastic hacker community in Maine. \u003cbr\u003e\u003c\/p\u003e","brand":"pwnagotchi","offers":[{"title":"Default Title","offer_id":67687871283382,"sku":"sku-48303129428284","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/httpsadmin.shopify.comstorepwnagotchiproducts8670844682556_2.png?v=1792440697"},{"product_id":"64gb-class-10-microsdhc-flash-memory-card-with-adapter-5pack","title":"GK PR01 64GB Class 10 Microsdhc Flash Memory Card with Adapter, 5Pack","description":"\u003cdiv\u003e \u003cdiv\u003e \u003ch2\u003eProduct description\u003c\/h2\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ch4\u003e Fast Transfer Speeds \u003c\/h4\u003e \u003cp\u003e With Class 10 speed rating, this Micro SD Memory Card enables fast file transfer performance between devices. \u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRead Speed: Up to 90MB\/s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWrite Speed: Up to 10MB\/s\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e Broad Compatibility \u003c\/h4\u003e \u003cp\u003e With the adapter, the micro SD card can be used as a full-size SDXC card, making it compatible with lots of devices, from smartphones to tablets to action cams and even DSLRs, improving performance and increasing storage on your various mobile devices. \u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch4\u003e Full HD Video Capture \u003c\/h4\u003e \u003cp\u003e This microSD Memory Card supports high-resolution photos taking and Full HD videos recording so that you can capture the moments that matter anytime and anywhere. \u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Customer Reviews \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.6 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e93,658\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.6 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e93,658\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.6 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e93,658\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.6 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e93,658\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.6 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e93,658\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.5 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e188\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Price \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$19.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e19\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$17.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e17\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$19.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e19\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$29.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e29\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$56.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e56\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e — \u003cspan\u003eno data\u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Speed Class \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e U1 C10 \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e U1 C10 \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e U1 C10 \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e U1 C10 \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e U1 C10 \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e U1 C10 A1 V30 \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Card Types\/Default Format \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e microSDHC (FAT32) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e microSDHC (FAT32) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e microSDXC (exFAT) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e microSDXC (exFAT) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e microSDXC (exFAT) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e microSDXC (exFAT) \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e U1 Transfer Speed \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e USB 3.0 Card Reader required \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e USB 3.0 Card Reader required \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e USB 3.0 Card Reader required \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e USB 3.0 Card Reader required \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e USB 3.0 Card Reader required \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e USB 3.0 Card Reader required \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Android Smartphone \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e 512GB Capacity Support required \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Tablet \u0026amp; e-Reader \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e 512GB Capacity Support required \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Gaming Console \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e 16GB Capacity and U1 Speed Support required \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e 32GB Capacity and U1 Speed Support required \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e 512GB Capacity Support required \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Digital Camera \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e 512GB Capacity Support required \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Dash \u0026amp; Drone Camera \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e exFAT format supporting device \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e exFAT format supporting device \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e exFAT format supporting device \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e exFAT format supporting device \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Surveillance \u0026amp; Action Camera \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e ✓ \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e exFAT format supporting device \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e exFAT format supporting device \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e exFAT format supporting device \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e exFAT format supporting device \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Video Support \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e 1080*1920 video \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e HD\/Full HD video (1440* 2560 max ) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e HD\/Full HD video (1440* 2560 max ) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e HD\/Full HD video (1440* 2560 max ) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e HD\/Full HD video (1440* 2560 max ) \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e HD\/Full HD video (1440* 2560 max ) \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003ctd\u003e \u003cform\u003e \u003cdiv\u003e \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e Add to Cart \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/div\u003e \u003c\/form\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Customer Reviews \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.6 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e93,658\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.6 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e2,587\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.9 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e28\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003ctd\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ci\u003e\u003cspan\u003e4.6 out of 5 stars\u003c\/span\u003e\u003c\/i\u003e \u003cspan\u003e7,402\u003c\/span\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Price \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$19.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e19\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$44.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e44\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$39.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e39\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e\u003cspan\u003e$67.99\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e$\u003c\/span\u003e\u003cspan\u003e67\u003cspan\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e99\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Series \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e Standard \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Premium \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Performance \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Standard Multipack \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Speed Class \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e C10 U1 \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e U1 A1 V30 \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e U1 A2 V30 \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e C10 U1 \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Read\/Write Speed \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e Up to 80\/15 MB\/s \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Up to 95\/30 MB\/s \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Up to 95\/85 MB\/s \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Up to 80\/15 MB\/s \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Capacities \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e Up to 512GB \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Up to 1TB \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Up to 1TB \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Up to 512GB \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Intended Using Purpose \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e General use \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Photos, Videos, Gaming, APPs \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e Photos, Videos, Gaming, Large APPs \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e General use \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth\u003e \u003cspan\u003e Packs \u003c\/span\u003e \u003c\/th\u003e \u003ctd\u003e \u003cspan\u003e 1\/2 Packs \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e 1\/2 Packs \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e 1\/2 Packs \u003c\/span\u003e \u003c\/td\u003e \u003ctd\u003e \u003cspan\u003e 5\/10 Packs \u003c\/span\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cul\u003e\n\u003cli\u003e5-Pack microSDXC Card. 64GB micro sd card includes an SD adapter that is suitable for both microSDXC and SDXC enabled host devices including smartphones, tablets, game consoles, digital cameras, desktops, laptops, etc.\u003c\/li\u003e\n\u003cli\u003eFast Read Write Speed Flash Memory Card. Read speed: up to 80MB\/s, Write speed: up to 15MB\/s. These speeds allow quick music, photo, video, document and file transfer or storage\u003c\/li\u003e\n\u003cli\u003eRated UHS-I Speed Class 1(U1) and Speed Class 10 (C10). A UHS memory card ensures even and sustained video recording performance for full HD videos, compatible with drones, video cameras, action cameras, or trail cams\u003c\/li\u003e\n\u003cli\u003e3-Year Limited Warranty. This high durability Micro Card is waterproof, shockproof, temperature proof and X-ray proof. Rugged construction helps resist damage and keeps data secure in your dashcam, CCTV, surveillance system or security cam\u003c\/li\u003e\n\u003cli\u003emicroSDXC Card Supported Devices ONLY, NOT backwards compatible with microSD\/microSDHC host devices. Consult your device specifications or look for the microSHXC logo on your host devices for compatibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glikch.tech","offers":[{"title":"64Gb - 5 Pack","offer_id":67692957728950,"sku":"a9c4e24d-e238-4534-a0b3-ca132b683207","price":84.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/6df4d08f9fe9abdc5db46f1141825d85.jpg?v=1792450590"},{"product_id":"esp32-halehound-wifi-bluetooth-signal-monitor-with-2-8-touchscreen-and-acrylic-case","title":"ESP32 HaleHound WiFi \u0026 Bluetooth Signal Monitor with 2.8” Touchscreen and Acrylic Case","description":"\u003cp class=\"p1\"\u003eThe \u003cspan class=\"s1\"\u003e\u003cb\u003eESP32 HaleHound WiFi, Bluetooth \u0026amp; RF Security Research Dev Board\u003c\/b\u003e\u003c\/span\u003e is a compact touchscreen development board for wireless learning, signal awareness, and cybersecurity research. Built around the ESP32 platform and packaged in a clear acrylic enclosure, this device gives hobbyists, students, makers, and security-minded users a portable way to explore nearby wireless activity from a simple 2.8” touch interface.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis unit comes with \u003cspan class=\"s1\"\u003e\u003cb\u003eHaleHound firmware v3.4.0 (or newer)\u003c\/b\u003e\u003c\/span\u003e installed on a 2.8” ESP32 touchscreen board. HaleHound-CYD is described by its developer as a multi-protocol ESP32 security toolkit for the ESP32-2432S028 “Cheap Yellow Display” platform, with menus for WiFi, Bluetooth, SIGINT, 2.4GHz, SubGHz, RFID, tools, settings, and related modules. Some features work directly from the onboard ESP32 hardware, while other advanced RF features require optional external modules such as CC1101, NRF24L01, PN532, GPS, or compatible RF expansion hardware. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSTS Collective focuses on practical communication devices, cybersecurity-inspired accessories, privacy tools, and tech gear for people who value functionality, privacy, and innovation, making this a strong fit for a lab bench, learning kit, or portable wireless research setup. \u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWhat It Can Be Used For\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eUse this as a compact educational tool for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLearning about WiFi, Bluetooth, and RF security concepts\u003c\/li\u003e\n\u003cli\u003eMonitoring nearby wireless signal activity\u003c\/li\u003e\n\u003cli\u003eViewing RSSI and signal strength behavior\u003c\/li\u003e\n\u003cli\u003eExploring ESP32-based firmware and touchscreen interfaces\u003c\/li\u003e\n\u003cli\u003eTesting defensive wireless awareness workflows\u003c\/li\u003e\n\u003cli\u003eBuilding a portable cybersecurity, maker, or RF research kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eHaleHound Firmware Capabilities\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003eDepending on configuration and installed hardware, HaleHound includes support for WiFi-focused tools, Bluetooth\/BLE tools, SIGINT and defensive monitoring modules, SubGHz analysis, 2.4GHz monitoring, RFID\/NFC tools, GPS-assisted logging, and a unified touchscreen interface. The public HaleHound materials describe features such as WiFi monitoring, Bluetooth\/BLE scanning, wardriving with GPS, LAN\/IoT recon, Flock Safety\/Raven-style BLE fingerprint detection, jam detection, SubGHz spectrum analysis, Flipper \u003ccode\u003e.sub\u003c\/code\u003e file transmit support, PN532 RFID\/NFC card functions, and a unified loot\/log manager. \u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eFeatures That Should Work From the Built-In ESP32 Hardware\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eThese are the safest features to advertise as likely available without extra RF modules:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTouchscreen HaleHound interface\u003c\/li\u003e\n\u003cli\u003eWiFi scanning and monitoring\u003c\/li\u003e\n\u003cli\u003eBluetooth\/BLE scanning and detection\u003c\/li\u003e\n\u003cli\u003eRSSI\/signal-strength visibility\u003c\/li\u003e\n\u003cli\u003eBasic wireless awareness and educational testing\u003c\/li\u003e\n\u003cli\u003eSD-card-supported logging where supported by firmware\u003c\/li\u003e\n\u003cli\u003eSettings, tools, and firmware menu functions\u003c\/li\u003e\n\u003cli\u003eUSB power\/data connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eFeatures That May Require Additional Hardware\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eSome HaleHound firmware menus may appear even if the required add-on module is not installed. These features may require additional hardware, wiring, configuration, or a compatible RF hat:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"s1\"\u003e\u003cb\u003eSubGHz features\u003c\/b\u003e\u003c\/span\u003e may require a \u003cspan class=\"s1\"\u003e\u003cb\u003eCC1101\u003c\/b\u003e\u003c\/span\u003e module or compatible RF hat. HaleHound documentation references CC1101-based SubGHz operation across bands such as 300-348 MHz, 387-464 MHz, and 779-928 MHz. \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"s1\"\u003e\u003cb\u003e2.4GHz NRF features\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003e may require an \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eNRF24L01+PA+LNA\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003e module.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"s1\"\u003e\u003cb\u003eRFID\/NFC features\u003c\/b\u003e\u003c\/span\u003e may require an external \u003cspan class=\"s1\"\u003e\u003cb\u003ePN532\u003c\/b\u003e\u003c\/span\u003e module. HaleHound documentation specifically references PN532 support for scanning, reading, cloning, brute force, and emulation of MIFARE Classic cards. \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"s1\"\u003e\u003cb\u003eGPS\/wardriving location logging\u003c\/b\u003e\u003c\/span\u003e may require an external GPS module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"s1\"\u003e\u003cb\u003eAdvanced SubGHz replay\/transmit functions\u003c\/b\u003e\u003c\/span\u003e may require a CC1101 or supported RF expansion module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"s1\"\u003e\u003cb\u003eAny external module function\u003c\/b\u003e\u003c\/span\u003e may require soldering, jumper wiring, firmware configuration, or a compatible expansion hat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eIncluded\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ESP32 HaleHound development board\u003c\/li\u003e\n\u003cli\u003e1 x 2.8” touchscreen display\u003c\/li\u003e\n\u003cli\u003e1 x Clear acrylic enclosure\u003c\/li\u003e\n\u003cli\u003e1 x USB data\/power cable\u003c\/li\u003e\n\u003cli\u003e1 x Plastic storage box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eImportant Notes\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"s1\"\u003eMicroSD card is \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003cb\u003enot included\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional RF modules are \u003cspan class=\"s1\"\u003e\u003cb\u003enot included\u003c\/b\u003e\u003c\/span\u003e unless specifically stated\u003c\/li\u003e\n\u003cli\u003eSome firmware functions require additional hardware\u003c\/li\u003e\n\u003cli\u003eThis is a development board, not a polished consumer appliance\u003c\/li\u003e\n\u003cli\u003eFirmware capabilities can change between HaleHound releases\u003c\/li\u003e\n\u003cli\u003eDevice is sold for educational, defensive, and authorized research use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eLegal and Responsible Use Notice\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003eThis device is sold strictly as an educational development board and wireless security research tool. It is intended for use on networks, devices, and RF environments you own or are authorized to test. The buyer is responsible for understanding and following all applicable laws and regulations. \u003ca href=\"https:\/\/stscollective.com\"\u003eSTS Collective\u003c\/a\u003e does not authorize or support unauthorized access, interference, surveillance, jamming, cloning, credential capture, or misuse of wireless networks, RF systems, RFID\/NFC systems, or Bluetooth devices.\u003c\/p\u003e\u003csection class=\"sts-product-guides\"\u003e\u003ch2\u003eSetup guides and downloads\u003c\/h2\u003e\n\u003cp\u003eDownload your free PDF guide for setup, power requirements, troubleshooting and documentation links. Save a copy for offline reference.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-halehound-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eDownload HaleHound CYD: first use (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eProject documentation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/github.com\/JesseCHale\/HaleHound-CYD\" target=\"_blank\" rel=\"noopener\"\u003eHaleHound-CYD source and hardware documentation\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eUse the instructions for your exact hardware and installed firmware version. Setup help: support@stscollective.com.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-project-resources-v1\"\u003e\u003ch2\u003eOriginal project, developer, and DIY resources\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eDIY installation and flashing:\u003c\/strong\u003e \u003ca href=\"https:\/\/flash.halehound.com\/\" target=\"_blank\" rel=\"noopener\"\u003eHaleHound Web Flasher\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThese links identify the upstream project, its documentation, and available self-installation or reprogramming information. STS Collective provides prepared hardware for customers who prefer not to assemble or flash a device themselves.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-product-details-v2\"\u003e\u003ch2\u003eHardware, firmware, compatibility, testing, and support\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e ESP32 HaleHound WiFi \u0026amp; Bluetooth Signal Monitor with 2.8” Touchscreen and Acrylic Case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e HaleHound is the firmware or software path identified above. The listing states that the image is installed or preloaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Supports only the frequencies, cards, readers, host connections, and software identified above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e This listing does not promise individual pre-shipment testing. Contact support before ordering if you need a specific verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup and DIY:\u003c\/strong\u003e Use the project, setup, and DIY references already included in this description. Follow the guide for the exact hardware and firmware. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-halehound-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 1\u003c\/a\u003e \u003ca href=\"https:\/\/github.com\/JesseCHale\/HaleHound-CYD\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e Contact support@stscollective.com for setup and product questions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLawful use:\u003c\/strong\u003e Use only on hardware, networks, cards, radio bands, and systems you own or have explicit permission to test. Follow applicable laws, platform rules, privacy rules, and radio regulations. Do not access, copy, interfere with, or disrupt other people's systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"sts-diy-flashing-v1\"\u003e\u003ch2\u003eDIY flashing option\u003c\/h2\u003e\n\u003cp\u003eFlashing your own compatible device is usually manageable when you follow the project guide. STS Collective provides a ready-to-use flashed device for customers who prefer convenience. You do not need to buy a flashed unit to use the project.\u003c\/p\u003e\n\u003cp\u003eUse the guide for your exact board and selected firmware:\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/github.com\/JesseCHale\/HaleHound-CYD\" target=\"_blank\" rel=\"noopener\"\u003eHaleHound firmware guide\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eConfirm the board revision, firmware target, power requirements, and current release before flashing. Reflashing replaces the installed firmware and may erase settings.\u003c\/p\u003e\u003c\/section\u003e","brand":"STS Technologies LLC","offers":[{"title":"Default Title","offer_id":67694619852982,"sku":"1HALEHOUND","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/hellhound1.png?v=1792453738"},{"product_id":"esp32-marauder-portable-wi-fi-bluetooth-research-device","title":"ESP32 Marauder Portable Wi‑Fi \u0026 Bluetooth Research Device","description":"\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e ESP32 Marauder device with firmware installed, integrated rechargeable battery and protective enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e USB-rechargeable battery; charge before portable use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion:\u003c\/strong\u003e GPS and TF\/MicroSD storage are supported expansion features. They are not listed as included in this package; confirm accessories before ordering if needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Wi-Fi and Bluetooth research functions depend on the installed firmware and hardware configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003eThe STS Tech ESP32 Marauder is a fully assembled and pre-flashed portable wireless research platform designed for Wi-Fi, Bluetooth, and ESP32 security research applications. Marauder firmware is preinstalled. Charge the device and review its operating instructions and accessory requirements before use.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBuilt around the powerful ESP32 platform, this compact handheld device combines wireless analysis tools, onboard controls, expandable TF card storage, rechargeable battery power, and optional GPS support into a portable field-ready platform for educational use, embedded experimentation, RF learning, and authorized wireless testing.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe integrated screen and five-way navigation joystick provide a streamlined user experience, while the onboard rechargeable battery allows for fully portable operation without requiring an external power source during use.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003ePerfect for cybersecurity labs, wireless training environments, makerspaces, ESP32 enthusiasts, IoT developers, and educational demonstrations.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePre-flashed with ESP32 Marauder firmware\u003c\/li\u003e\n\u003cli\u003eFirmware preinstalled; charge and review setup before use\u003c\/li\u003e\n\u003cli\u003ePortable handheld wireless research platform\u003c\/li\u003e\n\u003cli\u003eSupports Wi-Fi and Bluetooth research functionality\u003c\/li\u003e\n\u003cli\u003eBuilt-in rechargeable lithium battery\u003c\/li\u003e\n\u003cli\u003eTF \/ MicroSD card support for firmware and storage\u003c\/li\u003e\n\u003cli\u003eGPS expansion support\u003c\/li\u003e\n\u003cli\u003eIntegrated display and navigation joystick\u003c\/li\u003e\n\u003cli\u003eUSB rechargeable\u003c\/li\u003e\n\u003cli\u003eCompact protective enclosure\u003c\/li\u003e\n\u003cli\u003eOpen-source firmware ecosystem support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDesigned For\u003c\/b\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWireless research labs\u003c\/li\u003e\n\u003cli\u003eESP32 experimentation\u003c\/li\u003e\n\u003cli\u003eRF learning environments\u003c\/li\u003e\n\u003cli\u003eEmbedded systems education\u003c\/li\u003e\n\u003cli\u003eAuthorized wireless testing\u003c\/li\u003e\n\u003cli\u003ePortable diagnostics\u003c\/li\u003e\n\u003cli\u003eCybersecurity training\u003c\/li\u003e\n\u003cli\u003eIoT development and experimentation\u003c\/li\u003e\n\u003cli\u003eEducational demonstrations\u003c\/li\u003e\n\u003cli\u003eFirmware exploration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003ePackage Includes\u003c\/b\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x STS Tech ESP32 Marauder Device\u003c\/li\u003e\n\u003cli\u003ePre-installed Marauder firmware\u003c\/li\u003e\n\u003cli\u003eIntegrated rechargeable battery\u003c\/li\u003e\n\u003cli\u003eProtective enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eImportant Notice\u003c\/b\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"p1\"\u003eThis device is intended strictly for legal educational purposes, authorized security testing, research, and development. Users are solely responsible for ensuring compliance with all local, state, and federal laws.\u003c\/p\u003e\u003csection class=\"sts-product-guides\"\u003e\u003ch2\u003eSetup guides and downloads\u003c\/h2\u003e\n\u003cp\u003eDownload your free PDF guide for setup, power requirements, troubleshooting and documentation links. Save a copy for offline reference.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-marauder-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eDownload ESP32 Marauder: first use (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eProject documentation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/justcallmekoko\/ESP32Marauder\/wiki\" target=\"_blank\" rel=\"noopener\"\u003eMarauder documentation wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/justcallmekoko\/ESP32Marauder\" target=\"_blank\" rel=\"noopener\"\u003eFirmware source\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse the instructions for your exact hardware and installed firmware version. Setup help: support@stscollective.com.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-project-resources-v1\"\u003e\u003ch2\u003eOriginal project, developer, and DIY resources\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eDIY installation and flashing:\u003c\/strong\u003e \u003ca href=\"https:\/\/github.com\/justcallmekoko\/ESP32Marauder\/wiki\/Getting-Started\" target=\"_blank\" rel=\"noopener\"\u003eESP32 Marauder Getting Started\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThese links identify the upstream project, its documentation, and available self-installation or reprogramming information. STS Collective provides prepared hardware for customers who prefer not to assemble or flash a device themselves.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-product-details-v2\"\u003e\u003ch2\u003eHardware, firmware, compatibility, testing, and support\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e ESP32 Marauder Portable Wi‑Fi \u0026amp; Bluetooth Research Device\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Marauder is the firmware or software path identified above. The listing states that the image is installed or preloaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Review the hardware, power, operating system, software, accessory, and regional requirements stated above before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e This listing does not promise individual pre-shipment testing. Contact support before ordering if you need a specific verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup and DIY:\u003c\/strong\u003e Use the project, setup, and DIY references already included in this description. Follow the guide for the exact hardware and firmware. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-marauder-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 1\u003c\/a\u003e \u003ca href=\"https:\/\/github.com\/justcallmekoko\/ESP32Marauder\/wiki\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 2\u003c\/a\u003e \u003ca href=\"https:\/\/github.com\/justcallmekoko\/ESP32Marauder\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e Contact support@stscollective.com for setup and product questions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLawful use:\u003c\/strong\u003e Use only on hardware, networks, cards, radio bands, and systems you own or have explicit permission to test. Follow applicable laws, platform rules, privacy rules, and radio regulations. Do not access, copy, interfere with, or disrupt other people's systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"sts-diy-flashing-v1\"\u003e\u003ch2\u003eDIY flashing option\u003c\/h2\u003e\n\u003cp\u003eFlashing your own compatible device is usually manageable when you follow the project guide. STS Collective provides a ready-to-use flashed device for customers who prefer convenience. You do not need to buy a flashed unit to use the project.\u003c\/p\u003e\n\u003cp\u003eUse the guide for your exact board and selected firmware:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/justcallmekoko\/ESP32Marauder\/wiki\/Getting-Started\" target=\"_blank\" rel=\"noopener\"\u003eESP32 Marauder flashing guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/justcallmekoko\/ESP32Marauder\/wiki\" target=\"_blank\" rel=\"noopener\"\u003eESP32 Marauder flashing guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/justcallmekoko\/ESP32Marauder\" target=\"_blank\" rel=\"noopener\"\u003eESP32 Marauder flashing guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the board revision, firmware target, power requirements, and current release before flashing. Reflashing replaces the installed firmware and may erase settings.\u003c\/p\u003e\u003c\/section\u003e","brand":"STS Technologies LLC","offers":[{"title":"Default Title","offer_id":67694644494518,"sku":"1MARESP32","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/S6e63037c19d1447c8dcc95e6826965b49.webp?v=1792453782"},{"product_id":"nrfbox-2-4ghz-wireless-research-platform-esp32-nrf24-preloaded-tested-sts-collective","title":"nRFBOX 2.4GHz Wireless Research Platform | ESP32 + nRF24 | Preloaded \u0026 Tested | STS Collective","description":"\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery not included:\u003c\/strong\u003e This device does not include a battery. Add your own compatible battery if needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e nRFBOX with firmware installed, three external antennas, quick-start guide and protective packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup:\u003c\/strong\u003e Firmware is preloaded and tested. Review the power requirements before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003eExplore the 2.4 GHz spectrum with a portable, open-source wireless research platform.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe STS Collective nRFBOX is a professionally assembled and tested wireless development platform built around the ESP32 and multiple nRF24 transceivers. It arrives preloaded with the latest supported open-source firmware and is prepared for learning, experimentation, protocol analysis, and wireless research once you provide the required power.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDesigned for engineers, students, makers, security researchers, and RF enthusiasts, nRFBOX provides an easy way to visualize activity across the 2.4 GHz ISM band while serving as a flexible platform for future firmware updates and community-developed features.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eEvery device is assembled, flashed, and tested before shipment.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• Latest supported nRFBOX firmware preinstalled\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Professionally assembled and tested\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• ESP32 controller\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Multiple nRF24 2.4 GHz transceivers\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• OLED display\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• USB programming interface\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Rechargeable battery support\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• RGB status LED\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• External antenna\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Open-source firmware\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Community driven\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• firmware preloaded; battery not included\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• Wireless research\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Bluetooth research\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• 2.4 GHz spectrum exploration\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• RF experimentation\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Embedded development\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Security education\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Electronics enthusiasts\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Makerspaces\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Engineering students\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWhat’s Included\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• nRFBOX Wireless Research Platform\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Preloaded firmware\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• 3x External antenna(s)\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• STS Collective quick-start guide\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Protective packaging\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• Wireless signal discovery\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Bluetooth Low Energy exploration\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• RF learning\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Embedded development\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Open-source experimentation\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Wireless protocol education\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Electronics projects\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDisclaimer\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eThis product ships with publicly available open-source firmware preinstalled for customer convenience.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSTS Collective is an independent reseller and is not affiliated with or endorsed by the original nRFBOX project or its developers.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eThis device is intended for lawful education, research, experimentation, and authorized wireless testing.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cstrong\u003eTHIS DEVICE DOES NOT COME WITH A BATTERY. YOU CAN ADD YOUR OWN.\u003c\/strong\u003e\u003c\/p\u003e\u003csection class=\"sts-product-guides\"\u003e\u003ch2\u003eSetup guides and downloads\u003c\/h2\u003e\n\u003cp\u003eDownload your free PDF guide for setup, power requirements, troubleshooting and documentation links. Save a copy for offline reference.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-nrfbox-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eDownload nRFBOX: setup and spectrum viewing (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eProject documentation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/github.com\/cifertech\/nRFBox\" target=\"_blank\" rel=\"noopener\"\u003enRFBOX project and documentation\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eUse the instructions for your exact hardware and installed firmware version. Setup help: support@stscollective.com.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-project-resources-v1\"\u003e\u003ch2\u003eOriginal project, developer, and DIY resources\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eOriginal documentation:\u003c\/strong\u003e \u003ca href=\"https:\/\/github.com\/cifertech\/nRFBox\/wiki\" target=\"_blank\" rel=\"noopener\"\u003enRFBox Wiki\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThese links identify the upstream project, its documentation, and available self-installation or reprogramming information. STS Collective provides prepared hardware for customers who prefer not to assemble or flash a device themselves.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-product-details-v2\"\u003e\u003ch2\u003eHardware, firmware, compatibility, testing, and support\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e nRFBOX 2.4GHz Wireless Research Platform | ESP32 + nRF24 | Preloaded \u0026amp; Tested | STS Collective\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e nRFBOX is the firmware or software path identified above. The listing states that the image is installed or preloaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Review the hardware, power, operating system, software, accessory, and regional requirements stated above before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e The listing states that this configuration is tested before shipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup and DIY:\u003c\/strong\u003e Use the project, setup, and DIY references already included in this description. Follow the guide for the exact hardware and firmware. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-nrfbox-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 1\u003c\/a\u003e \u003ca href=\"https:\/\/github.com\/cifertech\/nRFBox\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 2\u003c\/a\u003e \u003ca href=\"https:\/\/github.com\/cifertech\/nRFBox\/wiki\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e Contact support@stscollective.com for setup and product questions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLawful use:\u003c\/strong\u003e Use only on hardware, networks, cards, radio bands, and systems you own or have explicit permission to test. Follow applicable laws, platform rules, privacy rules, and radio regulations. Do not access, copy, interfere with, or disrupt other people's systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"sts-diy-flashing-v1\"\u003e\u003ch2\u003eDIY flashing option\u003c\/h2\u003e\n\u003cp\u003eFlashing your own compatible device is usually manageable when you follow the project guide. STS Collective provides a ready-to-use flashed device for customers who prefer convenience. You do not need to buy a flashed unit to use the project.\u003c\/p\u003e\n\u003cp\u003eUse the guide for your exact board and selected firmware:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/cifertech\/nRFBox\/wiki\" target=\"_blank\" rel=\"noopener\"\u003enRFBOX firmware guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/cifertech\/nRFBox\" target=\"_blank\" rel=\"noopener\"\u003enRFBOX firmware guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the board revision, firmware target, power requirements, and current release before flashing. Reflashing replaces the installed firmware and may erase settings.\u003c\/p\u003e\u003c\/section\u003e","brand":"STS Technologies LLC","offers":[{"title":"Default Title","offer_id":67694666612918,"sku":"NRFB1","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/3.png?v=1792453824"},{"product_id":"eye-spy-mini-compact-surveillance-tracker-alpr-drone-awareness-detector","title":"Eye Spy Mini | Compact Surveillance, Tracker, ALPR \u0026 Drone Awareness Detector","description":"\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Eye Spy Mini with firmware installed, built-in color display and integrated 120mAh rechargeable battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Integrated rechargeable battery for portable use; USB power supports extended operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection and alerts:\u003c\/strong\u003e Supported Bluetooth LE and 2.4 GHz Wi-Fi signatures for ALPR, trackers, cameras and compatible drone broadcasts; visual and audible alerts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDetection limits:\u003c\/strong\u003e Alerts depend on supported wireless signatures, signal conditions and installed firmware. The device cannot detect every target; no alert does not prove that an area is free of surveillance or tracking equipment.\u003c\/p\u003e\n\u003cp\u003eBluetooth LE and Wi-Fi monitoring run in scheduled phases. Brief transmissions can be missed while another phase is active.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eEye Spy Mini | Compact Surveillance, Tracker, ALPR \u0026amp; Drone Awareness Detector\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBroad Wireless Surveillance Awareness in a Pocket-Sized Device\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy Mini brings the open-source Eye Spy surveillance-awareness platform to a compact, affordable device with an integrated color display.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eBuilt on the M5StickC Plus SE ESP32 platform and shipped by \u003cspan class=\"s1\"\u003e⁠\u003ca href=\"https:\/\/stscollective.com\/\"\u003e\u003cspan class=\"s2\"\u003eSTS Collective\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e with Eye Spy firmware preinstalled, Eye Spy Mini monitors nearby Bluetooth LE and 2.4 GHz Wi-Fi activity for supported wireless signatures associated with personal trackers, automated license plate readers, body-camera equipment, drones, surveillance cameras, smart glasses, iBeacons, and other devices.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eEye Spy Mini provides local visual and audible feedback through its integrated display and alert hardware.\u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003eNo cloud account. No subscription. No required phone.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eEye Spy is an open-source project developed by \u003cspan class=\"s1\"\u003e⁠\u003ca href=\"https:\/\/simeononsecurity.com\/\"\u003e\u003cspan class=\"s2\"\u003eSimeonOnSecurity\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e⁠\u003ca href=\"https:\/\/github.com\/simeononsecurity\/eye-spy\"\u003e\u003cspan class=\"s2\"\u003eView the Eye Spy source code, detection logic, documentation, and development history on GitHub\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWhat’s Included\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003e• 1 × Eye Spy Mini\u003cbr\u003e• Eye Spy ESP32 firmware preinstalled\u003cbr\u003e• Built-in 1.14-inch color display\u003cbr\u003e• Visual detection and score information\u003cbr\u003e• Audible detection alerts\u003cbr\u003e• Bluetooth LE monitoring\u003cbr\u003e• 2.4 GHz Wi-Fi scanning\u003cbr\u003e• Passive Wi-Fi promiscuous monitoring\u003cbr\u003e• Confidence-based aggregate scoring\u003cbr\u003e• Integrated rechargeable battery\u003cbr\u003e• Physical controls\u003cbr\u003e• Pocket-sized enclosure\u003cbr\u003e• No cloud account required\u003cbr\u003e• No subscription required\u003cbr\u003e• Firmware preinstalled; charge before use\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWhat Eye Spy Looks For\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy is designed for broad wireless surveillance and tracking awareness rather than concentrating on one type of infrastructure.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eCurrent Eye Spy detection logic includes supported signatures associated with:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• Flock Safety ALPR systems\u003cbr\u003e• Motorola Solutions and Vigilant Solutions ALPR\/LPR systems\u003cbr\u003e• Axon equipment\u003cbr\u003e• Apple AirTags\u003cbr\u003e• Samsung SmartTags\u003cbr\u003e• Tile trackers\u003cbr\u003e• OpenDroneID-compatible drones\u003cbr\u003e• Ray-Ban Meta smart glasses\u003cbr\u003e• Surveillance and IP cameras\u003cbr\u003e• Apple iBeacons\u003cbr\u003e• Supported Bluetooth modules associated with some card-skimmer designs\u003cbr\u003e• MeshCore nodes\u003cbr\u003e• Persistent unidentified Bluetooth LE devices\u003cbr\u003e• Additional supported surveillance and tracking signatures\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eSupported surveillance-camera manufacturer signatures include equipment from vendors such as Hikvision, Dahua, Axis, Ring, Nest, Arlo, Wyze, Reolink, FLIR, Amcrest, Vivotek, Hanwha, Mobotix, and Ubiquiti UniFi.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eEye Spy identifies supported wireless characteristics. A detection does not establish the ownership, purpose, or use of a nearby device.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eOpen-Source Eye Spy Firmware\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy Mini ships preconfigured with the open-source \u003cspan class=\"s1\"\u003e⁠\u003ca href=\"https:\/\/github.com\/simeononsecurity\/eye-spy\"\u003e\u003cspan class=\"s2\"\u003eEye Spy project\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe firmware combines Bluetooth LE monitoring, Wi-Fi scanning, promiscuous Wi-Fi monitoring, wireless signature matching, persistent-device tracking, and aggregate scoring.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eResearchers and developers have direct access to the detection logic, signature tables, scoring system, source code, tests, documentation, and development history.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eEye Spy is developed by \u003cspan class=\"s1\"\u003e⁠\u003ca href=\"https:\/\/simeononsecurity.com\/\"\u003e\u003cspan class=\"s2\"\u003eSimeonOnSecurity\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e and released under the Apache License 2.0 with SimeonOnSecurity attribution.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eHow Eye Spy Works\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy rotates through several wireless monitoring phases.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe normal scan cycle consists of approximately:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• 9 seconds of Bluetooth LE monitoring\u003cbr\u003e• Approximately 3 seconds of Wi-Fi scanning\u003cbr\u003e• 5 seconds of promiscuous Wi-Fi monitoring\u003cbr\u003e• Repeat\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe ESP32 shares radio resources between Bluetooth and Wi-Fi, so Eye Spy schedules these detection engines rather than running every radio mode simultaneously.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis architecture lets a small ESP32 device monitor several categories of supported wireless technology.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eMultiple Detection Methods\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy does not rely on one wireless identifier.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eDepending on the detection category, the firmware evaluates supported:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• Bluetooth LE device names\u003cbr\u003e• BLE service UUIDs\u003cbr\u003e• BLE manufacturer data\u003cbr\u003e• BLE advertisement payloads\u003cbr\u003e• Wi-Fi BSSIDs\u003cbr\u003e• Manufacturer OUIs\u003cbr\u003e• Wi-Fi SSIDs\u003cbr\u003e• 802.11 management frames\u003cbr\u003e• OpenDroneID characteristics\u003cbr\u003e• Persistent BLE-device behavior\u003cbr\u003e• Signal strength\u003cbr\u003e• Multiple independent indicators\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe resulting events feed Eye Spy’s aggregate awareness score.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eSimple CLEAR, CAUTION \u0026amp; ALERT Scoring\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy Mini presents the surrounding wireless environment through three primary status levels.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eCLEAR | Score 0–2\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eA green status indicates no significant supported detections have accumulated.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eCAUTION | Score 3–5\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eAn amber status indicates one or more lower-confidence observations or a combination of supported indicators.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eALERT | Score 6+\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eA red status indicates the score has reached Eye Spy’s alert threshold through high-confidence or multiple accumulated detections.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eDifferent signatures contribute different values based on their specificity.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe score decreases by one point every 60 seconds without new qualifying activity.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eA 120-second re-score cooldown prevents the same detection type from repeatedly increasing the score without limit.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBuilt-In Color Display\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy Mini includes a compact 1.14-inch color TFT display.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe interface keeps the current Eye Spy score and awareness state visible without requiring a separate phone or computer.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe display presents information such as:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• Current Eye Spy score\u003cbr\u003e• CLEAR, CAUTION, or ALERT state\u003cbr\u003e• Current scanning phase\u003cbr\u003e• Number of tracked devices\u003cbr\u003e• Total events\u003cbr\u003e• Most recent detection type\u003cbr\u003e• Signal information\u003cbr\u003e• Approximate range information when RSSI data is available\u003cbr\u003e• Time since the last alert\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe interface changes from green to amber to red as the aggregate Eye Spy score increases.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBluetooth Tracker Awareness\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy includes supported Bluetooth LE detection logic for several personal-tracker technologies.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThese include:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• Apple AirTag\u003cbr\u003e• Samsung SmartTag\u003cbr\u003e• Tile\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eEye Spy also maintains a persistence tracker for unidentified BLE devices.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe firmware tracks up to 50 unknown BLE addresses simultaneously and looks for devices repeatedly observed over time.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis gives Eye Spy another awareness mechanism beyond known manufacturer and service signatures.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eALPR Awareness\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy includes supported detection logic for Flock Safety and other ALPR\/LPR systems.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe firmware evaluates supported:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• Flock Safety OUI and MAC-prefix signatures\u003cbr\u003e• Flock-related SSID patterns\u003cbr\u003e• Flock-related BLE names\u003cbr\u003e• Flock external-battery signatures\u003cbr\u003e• ALPR\/LPR manufacturer identifiers\u003cbr\u003e• Motorola Solutions and Vigilant Solutions identifiers\u003cbr\u003e• ALPR-related SSID patterns\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eALPR awareness is one part of Eye Spy rather than its sole purpose.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDrone Remote ID Awareness\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy includes support for OpenDroneID detection through supported Bluetooth LE and Wi-Fi broadcasts.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eDuring promiscuous Wi-Fi monitoring, the firmware channel-hops across multiple 2.4 GHz channels while looking for supported Remote ID characteristics.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis adds drone awareness to the same pocket-sized device used for tracker, ALPR, camera, and body-camera awareness.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBody Camera \u0026amp; Smart Glasses Awareness\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy monitors supported Bluetooth LE characteristics associated with Axon equipment and Ray-Ban Meta smart glasses.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThese more specific signatures contribute higher values to the aggregate Eye Spy score.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eSurveillance Camera Awareness\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy includes supported OUI and SSID signatures associated with numerous surveillance-camera platforms.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eSupported manufacturer tables cover equipment from vendors such as:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• Hikvision\u003cbr\u003e• Dahua\u003cbr\u003e• Axis\u003cbr\u003e• Ring\u003cbr\u003e• Nest\u003cbr\u003e• Arlo\u003cbr\u003e• Wyze\u003cbr\u003e• Reolink\u003cbr\u003e• FLIR\u003cbr\u003e• Amcrest\u003cbr\u003e• Vivotek\u003cbr\u003e• Hanwha\u003cbr\u003e• Mobotix\u003cbr\u003e• Ubiquiti UniFi\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eBroad camera manufacturer and SSID observations receive lower confidence values than more specific device signatures.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003ePersistent Device Awareness\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eNot every nearby device matches a known Eye Spy signature.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eEye Spy therefore includes a persistence tracker for unidentified Bluetooth LE devices.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eAn unknown BLE address observed repeatedly across an extended period contributes a lower-level awareness signal.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis feature is intended to highlight persistent nearby wireless devices without classifying every unidentified Bluetooth device as surveillance equipment.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eCompact Surveillance Awareness\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy Mini measures approximately 48 × 24 × 8.4 mm and weighs approximately 17 grams.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eIts small form factor works well for:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• Everyday carry\u003cbr\u003e• Vehicle use\u003cbr\u003e• Travel\u003cbr\u003e• Field research\u003cbr\u003e• Wireless security testing\u003cbr\u003e• Privacy research\u003cbr\u003e• ALPR research\u003cbr\u003e• Tracker awareness\u003cbr\u003e• Drone Remote ID awareness\u003cbr\u003e• Cybersecurity education\u003cbr\u003e• Security demonstrations\u003cbr\u003e• Wireless experimentation\u003cbr\u003e• Portable surveillance-awareness kits\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eAn integrated 120mAh rechargeable battery supports portable use, while USB power supports longer vehicle or stationary operation.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003ePhysical Controls\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy Mini uses its integrated physical buttons for direct interaction.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe primary controls provide:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eA | RESET\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eResets the current Eye Spy score.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eB | SCAN\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eRestarts the current scan cycle.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis keeps basic operation local to the device.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eLocal Processing\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy performs its detection and scoring locally.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eIt does not require:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e• An Eye Spy cloud account\u003cbr\u003e• An STS Collective cloud account\u003cbr\u003e• A surveillance-provider account\u003cbr\u003e• An ALPR infrastructure account\u003cbr\u003e• A phone application\u003cbr\u003e• A recurring subscription\u003c\/p\u003e\n\u003cp class=\"p2\"\u003ePower on Eye Spy Mini and it begins monitoring supported nearby wireless activity.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eHardware Platform\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eM5StickC Plus SE\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eProcessor\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eESP32-PICO-D4 dual-core processor\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eUp to 240 MHz\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWireless\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003e2.4 GHz Wi-Fi\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eBluetooth LE\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDisplay\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003e1.14-inch color TFT LCD\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e135 × 240 native resolution\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e240 × 135 landscape Eye Spy interface\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBattery\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eIntegrated 120mAh rechargeable lithium battery\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eAlerts\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eOn-screen visual status\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eAudible notifications\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eControls\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eIntegrated physical buttons\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDimensions\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eApproximately 48 × 24 × 8.4 mm\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eApproximately 17g\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDetection Limitations\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy detects supported wireless characteristics rather than the physical presence of every surveillance or tracking device.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eDetection depends on a target exposing a supported wireless signature while Eye Spy is monitoring the applicable radio mode or channel.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eEquipment might go undetected when its relevant radio is disabled, its wireless behavior changes, its signal falls outside usable range, it operates on an unsupported frequency or protocol, or its transmission occurs outside the applicable Eye Spy scanning window.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eManufacturers also change hardware, firmware, identifiers, and wireless behavior over time.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eA CLEAR state therefore represents the current Eye Spy score based on observed supported signals. It does not establish the absence of surveillance or tracking equipment.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBroad Surveillance Awareness at an Entry-Level Price\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p2\"\u003eEye Spy Mini provides the core Eye Spy experience in a compact, display-equipped device.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eYou get Bluetooth LE monitoring, Wi-Fi monitoring, tracker awareness, ALPR awareness, drone Remote ID awareness, surveillance-camera signatures, confidence-based scoring, a built-in color display, and transparent open-source firmware in a pocket-sized device.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eNo cloud account. No subscription. No required phone.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eEye Spy is developed by \u003cspan class=\"s1\"\u003e⁠\u003ca href=\"https:\/\/simeononsecurity.com\/\"\u003e\u003cspan class=\"s2\"\u003eSimeonOnSecurity\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e and offered preconfigured by \u003cspan class=\"s1\"\u003e⁠\u003ca href=\"https:\/\/stscollective.com\/\"\u003e\u003cspan class=\"s2\"\u003eSTS Collective\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e⁠\u003ca href=\"https:\/\/github.com\/simeononsecurity\/eye-spy\"\u003e\u003cspan class=\"s2\"\u003eView Eye Spy Source Code \u0026amp; Technical Documentation\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\u003csection class=\"sts-product-guides\"\u003e\u003ch2\u003eSetup guides and downloads\u003c\/h2\u003e\n\u003cp\u003eDownload your free PDF guide for setup, power requirements, troubleshooting and documentation links. Save a copy for offline reference.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-eye-spy-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eDownload Eye Spy: setup and interpretation (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eProject documentation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/github.com\/simeononsecurity\/eye-spy\" target=\"_blank\" rel=\"noopener\"\u003eEye Spy source and current behavior\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eUse the instructions for your exact hardware and installed firmware version. Setup help: support@stscollective.com.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-product-details-v2\"\u003e\u003ch2\u003eHardware, firmware, compatibility, testing, and support\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Eye Spy Mini | Compact Surveillance, Tracker, ALPR \u0026amp; Drone Awareness Detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e FlockYou, Eye Spy is the firmware or software path identified above. The listing states that the image is installed or preloaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Review the hardware, power, operating system, software, accessory, and regional requirements stated above before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e This listing does not promise individual pre-shipment testing. Contact support before ordering if you need a specific verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup and DIY:\u003c\/strong\u003e Use the project, setup, and DIY references already included in this description. Follow the guide for the exact hardware and firmware. \u003ca href=\"https:\/\/simeononsecurity.com\/\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 1\u003c\/a\u003e \u003ca href=\"https:\/\/github.com\/simeononsecurity\/eye-spy\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 2\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-eye-spy-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e Contact support@stscollective.com for setup and product questions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLawful use:\u003c\/strong\u003e Use only on hardware, networks, cards, radio bands, and systems you own or have explicit permission to test. Follow applicable laws, platform rules, privacy rules, and radio regulations. Do not access, copy, interfere with, or disrupt other people's systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"sts-diy-flashing-v1\"\u003e\u003ch2\u003eDIY flashing option\u003c\/h2\u003e\n\u003cp\u003eFlashing your own compatible device is usually manageable when you follow the project guide. STS Collective provides a ready-to-use flashed device for customers who prefer convenience. You do not need to buy a flashed unit to use the project.\u003c\/p\u003e\n\u003cp\u003eUse the guide for your exact board and selected firmware:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/simeononsecurity\/flock-you-esp32\" target=\"_blank\" rel=\"noopener\"\u003eFlockYou project and flashing guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/simeononsecurity\/eye-spy\" target=\"_blank\" rel=\"noopener\"\u003eEye Spy project and flashing guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/simeononsecurity.com\/\" target=\"_blank\" rel=\"noopener\"\u003eUpstream project documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the board revision, firmware target, power requirements, and current release before flashing. Reflashing replaces the installed firmware and may erase settings.\u003c\/p\u003e\u003c\/section\u003e","brand":"STS Technologies LLC","offers":[{"title":"Default Title","offer_id":67694689779894,"sku":"M5SCSE1-EYESPY","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/sick2eye-2_07897fe4-2618-4df3-be11-a7c8b88c0dc1.png?v=1792453859"},{"product_id":"biscuit-esp32-c5-expansion-node-preloaded-tested-sts-collective","title":"Biscuit ESP32-C5 Expansion Node | Preloaded \u0026 Tested | STS Collective","description":"\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Requires a compatible primary Biscuit device that supports Biscuit Node firmware. Not compatible with Biscuit DIY nodes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One ESP32-C5 Expansion Node with Biscuit Node firmware installed, quick-start guide and protective packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e USB-C powered; provide a suitable USB power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup:\u003c\/strong\u003e Pair with your compatible primary device before use. This listing is for the expansion node.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003eExpand your Biscuit setup with additional wireless scanning capacity.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe STS Collective Biscuit ESP32-C5 Expansion Node arrives professionally flashed with the latest supported Biscuit Node firmware, fully tested, and ready to pair with compatible Biscuit devices.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eInstead of relying on a single radio to scan channels sequentially, multiple expansion nodes work alongside your primary Biscuit device to monitor additional WiFi channels simultaneously. The result is improved wireless visibility, increased scan coverage, and faster collection during wardriving and wireless research.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBuilt around the ESP32-C5 platform with dual-band WiFi 6, Bluetooth 5, 16MB Flash, and 8MB PSRAM, every node is verified before shipment and is prepared for pairing with a compatible primary device.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• Latest supported Biscuit Node firmware preinstalled\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Ready to pair with compatible Biscuit devices\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Adds additional simultaneous WiFi scanning capability\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Expand your scanning coverage with multiple nodes\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• ESP32-C5 processor\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Dual-band 2.4 GHz and 5 GHz WiFi 6\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Bluetooth 5\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• 16MB Flash\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• 8MB PSRAM\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• IPS color display\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• USB-C powered\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Professionally flashed and tested\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• STS Collective support\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBenefits\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• Monitor more WiFi channels simultaneously\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Improve wardriving efficiency\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Increase wireless scan coverage\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Scale your deployment with additional nodes\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Preloaded firmware; compatible-device pairing required\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• Wardriving\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Wireless research\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• WiFi surveys\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• RF enthusiasts\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Security researchers\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Network assessments\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWhat’s Included\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003e• 1 × Biscuit ESP32-C5 Expansion Node\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Latest supported Biscuit Node firmware preinstalled\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• STS Collective quick-start guide\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Protective packaging\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eCompatibility\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eDesigned for compatible Biscuit devices that support expansion nodes using Biscuit Node firmware. \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNOT COMPATIBLE WITH BISCUIT DIY NODES.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDisclaimer\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eThis product includes publicly available Biscuit Node firmware preinstalled for customer convenience.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSTS Collective is an independent reseller and is not affiliated with, endorsed by, or sponsored by Biscuit Shop or the Biscuit project.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eThis device is intended for lawful wireless research, education, testing, and network analysis.\u003c\/p\u003e\u003csection class=\"sts-product-guides\"\u003e\u003ch2\u003eSetup guides and downloads\u003c\/h2\u003e\n\u003cp\u003eDownload your free PDF guide for setup, power requirements, troubleshooting and documentation links. Save a copy for offline reference.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-biscuit-node-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eDownload Biscuit Node: pair with a manager (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eProject documentation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/codehedge.github.io\/Biscuit-Wiki\/devices\/node.html\" target=\"_blank\" rel=\"noopener\"\u003eOfficial Biscuit Node setup\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/codehedge.github.io\/Biscuit-Wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eBiscuit documentation hub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse the instructions for your exact hardware and installed firmware version. Setup help: support@stscollective.com.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-project-resources-v1\"\u003e\u003ch2\u003eOriginal project, developer, and DIY resources\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eOriginal project developer and source:\u003c\/strong\u003e \u003ca href=\"https:\/\/biscuitshop.us\/pages\/diy-biscuits\" target=\"_blank\" rel=\"noopener\"\u003eBiscuit Shop\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThese links identify the upstream project, its documentation, and available self-installation or reprogramming information. STS Collective provides prepared hardware for customers who prefer not to assemble or flash a device themselves.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-product-details-v2\"\u003e\u003ch2\u003eHardware, firmware, compatibility, testing, and support\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Biscuit ESP32-C5 Expansion Node | Preloaded \u0026amp; Tested | STS Collective\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Biscuit DIY is the firmware or software path identified above. The listing states that the image is installed or preloaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Review the hardware, power, operating system, software, accessory, and regional requirements stated above before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e The listing states that this configuration is tested before shipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup and DIY:\u003c\/strong\u003e Use the project, setup, and DIY references already included in this description. Follow the guide for the exact hardware and firmware. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-biscuit-node-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 1\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e Contact support@stscollective.com for setup and product questions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLawful use:\u003c\/strong\u003e Use only on hardware, networks, cards, radio bands, and systems you own or have explicit permission to test. Follow applicable laws, platform rules, privacy rules, and radio regulations. Do not access, copy, interfere with, or disrupt other people's systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"sts-diy-flashing-v1\"\u003e\u003ch2\u003eDIY flashing option\u003c\/h2\u003e\n\u003cp\u003eFlashing your own compatible device is usually manageable when you follow the project guide. STS Collective provides a ready-to-use flashed device for customers who prefer convenience. You do not need to buy a flashed unit to use the project.\u003c\/p\u003e\n\u003cp\u003eUse the guide for your exact board and selected firmware:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/codehedge.github.io\/Biscuit-Wiki\/devices\/diy.html\" target=\"_blank\" rel=\"noopener\"\u003eBiscuit DIY flashing guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/codehedge.github.io\/Biscuit-Wiki\/devices\/node.html\" target=\"_blank\" rel=\"noopener\"\u003eBiscuit DIY flashing guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/codehedge.github.io\/Biscuit-Wiki\/\" target=\"_blank\" rel=\"noopener\"\u003eBiscuit DIY flashing guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the board revision, firmware target, power requirements, and current release before flashing. Reflashing replaces the installed firmware and may erase settings.\u003c\/p\u003e\u003c\/section\u003e","brand":"STS Technologies LLC","offers":[{"title":"Default Title","offer_id":67694722941110,"sku":"BEN1","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/en1.png?v=1792453916"},{"product_id":"chameleon-ultra-lf-hf-rfid-emulator-analyzer","title":"Chameleon Ultra LF + HF RFID Emulator \u0026 Analyzer","description":"\u003cp\u003eThe Chameleon Ultra is a portable LF and HF RFID emulator and analyzer designed for security research, red teaming, and advanced access control testing. Built on the NRF52840 platform, it offers 8 independent emulation slots, tag cloning and writing, key-cracking support, and full BLE 5.0 and USB-C connectivity for multi-platform workflows on iOS, Android, macOS, Windows, and Linux.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003ePerfect for penetration testers, physical security professionals, access control researchers, and RFID hobbyists who need a highly portable device that supports UID changeability, tag emulation, cloning, cracking, and system testing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cb\u003e📦 Included in This Listing — Exactly What You Receive\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eThis package ONLY includes the following items:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003e1× Chameleon Ultra device\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003e1× USB-A to USB-C cable (30cm)\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003e1× USB-C OTG adapter\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003e1× Micro-USB OTG adapter\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003eNo additional accessories are included.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cb\u003e🔹 \u003c\/b\u003e\u003cb\u003e8 Independent Emulation Slots\u003c\/b\u003e\n\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eSwitch between multiple LF (125kHz) and HF (13.56MHz) tag profiles instantly.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cb\u003e🔹 \u003c\/b\u003e\u003cb\u003eFull Emulation Support\u003c\/b\u003e\n\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eProgram the device to behave like a wide variety of smart cards, including many commonly used access badges.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cb\u003e🔹 \u003c\/b\u003e\u003cb\u003eTag Cloning \/ Writing\u003c\/b\u003e\n\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eRead supported LF\/HF tags and write the data to compatible blanks — ideal for lab work, testing, or replacing badges.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cb\u003e🔹 \u003c\/b\u003e\u003cb\u003eKey Cracking Support\u003c\/b\u003e\n\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eWorks with MIFARE Classic® and other chipsets using known key-recovery methods.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e(Capabilities vary based on current firmware.)\u003c\/p\u003e\n\u003ch3\u003e\n\u003cb\u003e🔹 \u003c\/b\u003e\u003cb\u003eBLE 5.0 + USB Connectivity\u003c\/b\u003e\n\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eControl the device via MTools BLE or ChameleonUltraGUI, or use direct USB-C communication.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cb\u003e🔹 \u003c\/b\u003e\u003cb\u003eMulti-Platform Support\u003c\/b\u003e\n\u003c\/h3\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s2\"\u003eCompatible with \u003c\/span\u003e\u003cb\u003eiOS, Android, macOS, Windows, and Linux\u003c\/b\u003e\u003cspan class=\"s2\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eChipset:\u003c\/b\u003e\u003c\/span\u003e NRF52840\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eMemory:\u003c\/b\u003e\u003c\/span\u003e 256KB RAM \/ 1MB Flash\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eFrequencies:\u003c\/b\u003e\u003c\/span\u003e 125kHz LF \u0026amp; 13.56MHz HF\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eConnectivity:\u003c\/b\u003e\u003c\/span\u003e Bluetooth BLE 5.0, USB-C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBattery:\u003c\/b\u003e\u003c\/span\u003e Rechargeable LiPo (up to ~6 months standby)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eControls:\u003c\/b\u003e\u003c\/span\u003e 2× programmable hardware buttons\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eVisual Indicators:\u003c\/b\u003e\u003c\/span\u003e RGB LED system for slot and mode status\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cb\u003eWhat You Can Do With It\u003c\/b\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cb\u003eEmulate\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eSimulate various LF\/HF tag types for system testing and reader validation.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eClone\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eCopy supported tag data to blanks or internal emulation slots.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eAnalyze \u0026amp; Test\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eAssess reader performance, validate access systems, and identify configuration weaknesses.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eExperiment \u0026amp; Develop\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eModify or rebuild the open-source firmware to create custom workflows and tools.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cb\u003eSoftware Compatibility\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eMTools BLE\u003c\/b\u003e\u003c\/span\u003e (iOS\/Android)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eChameleonUltraGUI\u003c\/b\u003e\u003c\/span\u003e (Windows\/macOS\/Linux)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eOfficial ChameleonUltra CLI\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eFull open-source firmware from the RRG team\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cb\u003eImportant Notes\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eSome chipsets and features (e.g., T5557, certain cracking flows) may still be in development.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eEnsure legal compliance and proper authorization before testing or copying any credentialed media.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eIntended for \u003c\/span\u003e\u003cb\u003esecurity research, auditing, and lawful testing only\u003c\/b\u003e\u003cspan class=\"s1\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cb\u003eWhy Buy From STS Collective\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e🇺🇸 \u003c\/span\u003e\u003cb\u003eFast domestic U.S. shipping\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e✔️ Curated tools for red teams, RF researchers, and access control professionals\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e✔️ Direct support from an experienced operator—not a dropship reseller\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003e✔️ Secure, protective packaging with tracking\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003csection class=\"sts-product-guides\"\u003e\u003ch2\u003eSetup guides and downloads\u003c\/h2\u003e\n\u003cp\u003eDownload your free PDF guide for setup, power requirements, troubleshooting and documentation links. Save a copy for offline reference.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-chameleon-ultra-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eDownload Chameleon Ultra: first connection (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eProject documentation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/github.com\/RfidResearchGroup\/ChameleonUltra\" target=\"_blank\" rel=\"noopener\"\u003eChameleon Ultra project and supported software\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eUse the instructions for your exact hardware and installed firmware version. Setup help: support@stscollective.com.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-project-resources-v1\"\u003e\u003ch2\u003eOriginal project, developer, and DIY resources\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eOriginal documentation:\u003c\/strong\u003e \u003ca href=\"https:\/\/github.com\/RfidResearchGroup\/ChameleonUltra\/wiki\" target=\"_blank\" rel=\"noopener\"\u003eChameleonUltra wiki\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eThese links identify the upstream project, its documentation, and available self-installation or reprogramming information. STS Collective provides prepared hardware for customers who prefer not to assemble or flash a device themselves.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"sts-product-details-v2\"\u003e\u003ch2\u003eHardware, firmware, compatibility, testing, and support\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Chameleon Ultra LF + HF RFID Emulator \u0026amp; Analyzer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e Chameleon Ultra is the firmware or software path identified above. The listing states that the image is installed or preloaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Supports only the frequencies, cards, readers, host connections, and software identified above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e This listing does not promise individual pre-shipment testing. Contact support before ordering if you need a specific verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup and DIY:\u003c\/strong\u003e Use the project, setup, and DIY references already included in this description. Follow the guide for the exact hardware and firmware. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0963\/1340\/9838\/files\/sts-chameleon-ultra-guide.pdf?v=1790454935\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 1\u003c\/a\u003e \u003ca href=\"https:\/\/github.com\/RfidResearchGroup\/ChameleonUltra\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 2\u003c\/a\u003e \u003ca href=\"https:\/\/github.com\/RfidResearchGroup\/ChameleonUltra\/wiki\" target=\"_blank\" rel=\"noopener\"\u003eProject or setup documentation 3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e Contact support@stscollective.com for setup and product questions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLawful use:\u003c\/strong\u003e Use only on hardware, networks, cards, radio bands, and systems you own or have explicit permission to test. Follow applicable laws, platform rules, privacy rules, and radio regulations. Do not access, copy, interfere with, or disrupt other people's systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e","brand":"STS Technologies LLC","offers":[{"title":"Default Title","offer_id":67694915125430,"sku":"1CHAMULTRA","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/files\/camelion_ultra_with_assessories.png?v=1792454236"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0354\/8854\/collections\/rn-image_picker_lib_temp_f1c1e9cf-b9f6-4189-bb36-ee5934cd33bf.png?v=1792466899","url":"https:\/\/www.glikch.tech\/collections\/cybersecurity-tools.oembed","provider":"Glikch.tech","version":"1.0","type":"link"}